Magnetic Sign Storage:
- Keep your Magnetic Signs in a clean, dry place when not in use.
- Store your Magnetic Signs by stacking them on a flat surface.
- Do not stack vehicle signs with the magnetic sides touching each other.
- Do not store heavy objects on top of or against your magnet signs.
Storing a magnetic sign rolled is not recommended, but if you must store them rolled, stand it on one
end, with the printed side facing out.
- NEVER fold a Magnetic Sign.
- DO NOT store on a uneven surface e.g radiator. (this will leave ripples in the magnet)
- The best way to store a magnetic sign.
- The back or sides of a filing cabinet
- The front or sides of a frige/freezer.
Proper use and care of Magnetic Signs will help extend the life of your Magnetic Sign and help to
protect the metallic surface to which it is applied.
Preparing the Vehicle (or Other) Surface:
Wipe down the surface using a soapy water mix and allow to dry before any attempt at application.
Before affixing your Magnetic Sign to a metal surface, please make sure all surface paints, clear
coats and waxes are cured (hardened). Approximate curing times are: 90 days for paint, 60 days for
clear coats, and 2 days for wax.
Magnetic signs will not work on Emron® paint, vehicles with non‐magnetic body panels
(such as fiberglass), nonferrous metals like aluminum, plastic on Saturn® cars, vehicles that have
been repaired with Bondo®, simulated wood‐grain siding, or vehicles that have been painted numerous times.
Clean the metallic surface and the magnet with mild detergent. Wipe dry with a soft cloth or allow the
surface to air dry normally.
Magnetic Signs can become stiff in cold weather or locations and may not properly grip
the vehicle panels. Please use caution when using your magnets in these conditions. If placing or
repositioning Magnetic Signs on a vehicle under cold conditions, doing so in a heated garage is
recommended. The vehicle should be given time to reach room temperature (16°c) before
applying, removing, or repositioning Magnetic Signs.
Applying the Sign to the Vehicle:
Attach your Magnetic Sign to a smooth metal surface that is flat as possible. The surface should be
free of trim, moldings, indentations, dents, ridges, or rust spots.
For best results, the Magnetic Sign itself should be at a room temperature of 60°F (16°C) or above
when installed.
Do not apply a Magnetic Sign that has been stored rolled with the magnetic surface facing out.
The Magnetic Sign may not attach properly to the metallic surface, resulting in lifted corners or air gaps
which will weaken its hold on the metal surface. Follow the instructions given on Magnetic Sign
Storage.
Starting with one corner of the sign first, and then allow the magnetic pull between the sign and the
vehicle’s surface to help attach the rest. Be sure the entire Magnetic Sign is flat against the surface
with no air pockets.
If you place the magnet in the wrong position, completely remove the magnet from the surface and
reaffix. When removing the Magnetic Sign, lift at the sides and not at the corners. Do not pull the
magnetic sign across the surface, as that may stretch and/or damage.
Avoid using Magnetic Signs on horizontal metal surfaces exposed to direct sunlight (such as vehicle
hoods, roofs, trunks, etcetera) or temperatures exceeding 150° F (65.6° C). Avoid using Magnetic
Signs in very cold weather, especially temperatures below ‐15° F (‐26° C). Cold weather will make the
magnet more brittle, so please use caution when handling your Magnetic Signs in cold weather.
long‐term use on surfaces frequently exposed to sunlight (such as vehicles) can
result in uneven fading of the surface as the area covered by the Magnetic Sign is shielded from the
sun (and ultraviolet rays in particular).
Make sure that your Magnetic Signs are firmly affixed to the vehicle before driving
Cleaning.
Always ensure your magnetics are clean and free of debris before applying to avoid scratching the paint.
You can use a lint free cloth with soapy water on both sides and dry thouroughly before applying.
Even when not in use it is a good idea to keep them clean and free of dirt with a quick wipe over once a week.
Do not use any chemicals (cleaning agents) on the magetics.
Do not store near any items that can be affected by magnets. (if unsure keep away)
- Laptops
- Screens
- Cassette Tapes
- Hard disks
- Mobile phones
- Electronic equipment etc.
